收藏本站
(2/11)
E M C
C o m p o n e n t s
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 6 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH or
less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
001-01 / 20130723 / e9712_acm.fm
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
ACOL-8.000MHZ-EK OSCILLATOR 8.000MHZ 3.3V FULL-SZ
ACT45B-510-2P-TL003 CHOKE COMMON MODE 2000 OHM SMD
ACZ-32.768KBE-T OSCILLATOR 32.768KHZ 3.3V SMD
AD3721R SWITCH ROLLER LEVER
AD5721R SWITCH ROLLER LEVER
ADD3721R SWITCH ROLLER LEVER
ADE0204 SWITCH DIP EXT ACTUATOR 2POS
ADE08S04 SWITCH DIP SPST EXT ACT 8POS SMD
相关代理商/技术参数
ACM3225-601-2P 功能描述:电磁干扰滤波器 600ohms 100MHz 50volts RoHS:否 制造商:STMicroelectronics 电容:12 pF 电路类型: 最大直流电流: 最大直流电阻: 电压额定值:6 V 容差: 端接类型:SMD/SMT 工作温度范围:- 30 C to + 85 C 系列:EMIF03
ACM3225-601-2P-T 制造商:TDK Innoveta 功能描述:Common Mode Chokes Dual 600Ohm 100MHz 1A SMD T/R 制造商:TDK 功能描述:CHOKE COM MODE 2X600Z 制造商:TDK 功能描述:Common mode choke SMD 3225 600R
ACM3225-601-2P-T001 功能描述:电磁干扰滤波器 Common Mode Chokes RoHS:否 制造商:STMicroelectronics 电容:12 pF 电路类型: 最大直流电流: 最大直流电阻: 电压额定值:6 V 容差: 端接类型:SMD/SMT 工作温度范围:- 30 C to + 85 C 系列:EMIF03
ACM32258002P 制造商:TDK Innoveta 功能描述:Common Mode Chokes Dual 80Ohm 100MHz 400mA SMD
ACM3225-800-2P 功能描述:电磁干扰滤波器 80ohms 100MHz 50volts RoHS:否 制造商:STMicroelectronics 电容:12 pF 电路类型: 最大直流电流: 最大直流电阻: 电压额定值:6 V 容差: 端接类型:SMD/SMT 工作温度范围:- 30 C to + 85 C 系列:EMIF03
ACM3225-800-2P-T 功能描述:CHOKE COMMON MODE 80 OHM SMD RoHS:否 类别:滤波器 >> 共模扼流圈 系列:ACM 标准包装:2 系列:DKLP-1 滤波器类型:电源线 线路数:2 电感:40mH 电流:5A DC 电阻(DCR):126 毫欧 阻抗:- 安装类型:底座安装，引线 尺寸/尺寸:3.150" L x 3.150" W（80.00mm x 80.00mm） 高度（最大）:2.000"（50.80mm） 封装/外壳:- 工作温度:-25°C ~ 100°C 包装:散装
ACM3225-800-2P-T001 功能描述:电磁干扰滤波器 80PF RoHS:否 制造商:STMicroelectronics 电容:12 pF 电路类型: 最大直流电流: 最大直流电阻: 电压额定值:6 V 容差: 端接类型:SMD/SMT 工作温度范围:- 30 C to + 85 C 系列:EMIF03
ACM3225-900-2PT 制造商:TDK 制造商全称:TDK Electronics 功能描述:Common Mode Choke Colls for Signal Line